A state of the Art sensor for all WFI and Ultra Pure Water application. The NPT adaption allows a huge installation range in steel and PVDF tubes.
Detailed certificates are delivered with the sensor.
The durable connector allowes a disconnection and together with our traceable resistors sets you can perform an smart transmitter validation. (USP & EP)
Cables with different lengths are available.
| Recommended measuring range | 0.055 ... 1'000 µS/cm |
| Accuracy (at 25°C) |
±2% up to 500 µS/cm ±3% above 500 µS/cm up to 1'000 µS/cm |
| Cell constant | 0.1 cm-1 |
|
Material: |
|
| - Shaft & Electrode | SS 316L (1.4435), stainless steel, Titan |
| - Isolator | PEEK |
| Temperature sensor | Pt1000, accuracy ±0.2°C |
| Sensor mounting | NPT thread ¾" |
| Operating temperature | -10 ... 120°C |
| Sterilisation temperature (short-time) | -10 ... 155°C |
| Operating pressure |
17 bar at 25°C max. 7 bar at +95°C |
| Length totally | 102 mm |
| Insertion length | 29 mm |
Sensor is equipped with fixed cable (~30cm, PTFE) with M16 male plug.
Copyright © 2018-2019 swan-sh.com 瑞士swan水质分析仪 上海相泽机械 版权所有
